Abstract

Rolling bearing plays an important role in rotary machines and industrial processes. Effective fault diagnosis technology for rolling bearing directly affects the life and operator safety of the devices. In this paper, a fault diagnosis method based on tunable-Q wavelet transform (TQWT) and convolutional neural network (CNN) is proposed to reduce the influence of noise on bearing vibration signal and the dependence on the experience of traditional diagnosis methods. TQWT is used to decompose and denoise the vibration signal, while the CNN is adopted to extract fault features and carry out fault classification. Seven motor operating conditions—normal, drive end rolling ball failure (DE-B), drive end inner raceway failure (DE-IR), drive end outer raceway failure (DE-OR), fan end rolling ball failure (FE-B), fan end inner raceway fault (FE-IR) and fan end outer raceway fault (FE-OR)—are used to evaluate the proposed approach. The experimental results indicate that the fault diagnosis accuracy of the proposed method reaches 99.8%.

Highlights

  • Rolling bearings are widely employed in many machines

  • Compared with the above bearing fault diagnosis methods, this paper proposes a novel fault diagnosis method based on tunable-Q wavelet transform (TQWT) and convolutional neural network (CNN), in which TQWT is used to eliminate the influence of noise on original bearing vibration signal, while CNN is adopted for fault diagnosis

  • As this paper mainly explores the feasibility of fault diagnosis using TQWT and CNN, instead of building up a testbed, this paper directly uses the data released by the Case Western Reserve University Bearing Data Center [27]

Read more

Summary

Introduction

Rolling bearings are widely employed in many machines. Its operational condition directly influences the lifetime and operator safety of the machine. Inturi et al [3] proposed an integrated condition monitoring scheme for the bearing on a wind turbine gearbox by using the discrete wavelet transform (DWT), together with vibration, acoustic, and lubrication oil analysis techniques Their experimental results show that the presented integrated condition monitoring method has better classification accuracy than a single condition monitoring approach. Manjurul et al [5] presented a bearing fault diagnosis approach using bearing acoustic emission signals and a Bayesian inferencebased multi-class support vector machine, and the proposed method is able to improve the classification accuracy. Islam et al [17] proposed a fault diagnosis system using adaptive deep convolutional neural network and wavelet packet transform to automate and better generalize the fault feature extraction and diagnosis process.

TQWT principle
CNN principle
Experimental Validation
Signal denoising by TQWT
CNN model parameter setting
Experiment results
Findings
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.