Abstract
AbstractThe fatigue strength of non‐load‐carrying fillet welded joints of KE36(TMCP) steel was studied. Both residual stress measurements and fatigue tests were carried out, with the plate thickness, the plate width and the heat input being varied. Specimens given a Post Weld Heat Treatment (PWHT) were also prepared.The plate width had no effect on the fatigue strength, because it hardly affected the transverse residual stresses at the weld toe. However, the heat input influenced the transverse residual stress distribution, and a significant difference in fatigue strength due to the heat input was observed, especially when N≥ 106 cycles. It was also found that PWHT removed almost all the residual stresses at the weld toe, improving the fatigue strength drastically.In this study, the values of stress concentration factor K2 were estimated by Machida's method and it was concluded that the thickness effect resulted from a combination of both stress concentration and residual stresses with the contribution of the latter being particularly significant for N≥ 106 cycles.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Fatigue & Fracture of Engineering Materials & Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
