Abstract
The present study aims to predict the fatigue strength of ion-nitrided 42CrMo4 steel, using multiaxial high cycle fatigue (HCF) criteria and considering the effects of stabilized residual stresses and surface hardening. The predicted fatigue strength was compared to experimental data obtained after three-points bending fatigue tests at two stress ratios (0.1 and 0.5) and for notched (Kt = 1.6) nitrided and untreated specimens. A 3D finite element (FE) model of a three-point bending fatigue test was developed under ABAQUS software in order to determine the actual applied cyclic stress state at the notch. The results show that ion-nitriding treatment led to 32% improvement in the fatigue strength at 106 cycles compared to the untreated material. This improvement is explained by the advantageous effect of ion-nitriding treatment in terms of compressive residual stresses and surface layer hardening. Both stabilized residual stress state and hardening effects were successfully implemented into various multi-axial HCF criteria, including Sines, Crossland, Dang Van and Matake criteria. A sensitivity analysis has shown that Crossland criterion has permitted to predict the fatigue limits in accordance with the experimental results.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.