Fatigue Life Estimation of Structural Components Using Macrofibre Composite Sensors

Abstract

Abstract: Recently, a number of different structural health monitoring (SHM) techniques have been developed for the online inspection of air, land and sea engineering structures. Various smart materials are employed for detecting eminent damage in situ. Fatigue cracks in structural components are the most common cause of structural failure when exposed to fatigue loading. Fatigue design of structural components is typically accomplished either using a set of stress cycle (S‐N) data obtained from prior fatigue tests or using the fracture mechanics approach. The fracture mechanics approach considers the fatigue life of structures as a summation of crack initiation life and crack propagation life. The stress intensity factor (SIF) is required for the estimation of fatigue crack propagation life from the linear elastic fracture mechanics (LEFM) perspective. However, the accurate prediction of the SIF is difficult especially when the geometry or the boundary conditions of a structure becomes complex. In this study, a SHM application of macrofibre composite (MFC) sensors is presented. A set of MFC sensors is used for the real‐time measurement of the SIF. The measured values of the SIF are later used for the prediction of the crack propagation life. The impedance‐based SHM technique using the same set of MFC sensors is employed for the detection of crack initiation life.