Abstract
AbstractThis paper details a study of the application of notch stress intensity theory to the fatigue failure mode analysis of the transition in load‐carrying cruciform welded joints. The weldment fatigue crack initiation point is difficult to predict precisely because it usually occurs in the vicinity of the weld toe or weld root. To investigate the relationship between fatigue failure location and the geometry of the weldments, we analysed the weld toe and root asymptotic notch stress fields were analysed using the notch stress intensity factors on the basis of the Williams' solution in Linear Elastic Fracture Mechanics (LEFM). Numerous configurations of cruciform joints of various plate thicknesses, transverse plate thickness, weld sizes and incomplete penetration size were used to investigate the location of the fatigue failure. The strain energy density (SED) surrounding the notch tip was introduced to unify the scalar quantity and preclude the inconsistency of the dimensionality of the notch stress intensity factors for various notch opening angles. The results of the investigation showed that the SED approach can be used to determine the transition zone for a variety of joint geometries. The validity of the SED criteria was verified by comparing the experimental results of this study with the complied results for load‐carrying cruciform welded joints reported in literature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Fatigue & Fracture of Engineering Materials & Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.