Abstract
Fatigue stresses in steel bridges can lead to crack propagation, gradually decreasing the structural stability of the bridge. Conventional strengthening techniques for structures have shown limited effectiveness in preventing crack growth. The objective of this research is to enhance the fatigue life of cracked steel beams through the application of ultra-high modulus carbon fiber reinforced polymer (UHM-CFRP) plates. Two sets of tests, including quasi-static testing and fatigue testing, were conducted on both cracked and uncracked steel beams. All beams were tested under identical loading conditions, with a total of five beams examined. Control beams were used to compare fatigue life under different loading ranges. One beam was reinforced with UHM-CFRP plates, another utilized prestressed UHM-CFRP plates, and another employed UHM-CFRP plates with end clamps. The experimental study revealed a significant 8 times increase in fatigue lives for cracked steel beams repaired using the UHM-CFRP compared to the control beam. Additionally, the (10 %) prestressed UHM-CFRP plate not only doubled the fatigue life of identical beams compared to UHM-CFRP plates but also significantly reduced residual deflection during fatigue crack growth, highlighting its efficacy in fatigue resistance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
