Abstract
ABSTRACTThe ferrite phase of cast duplex stainless steels becomes embrittled after thermal ageing, leading to a significant decrease in fracture properties. In the present paper, the influence of ageing and solidification structure on the fatigue crack growth rates (FCGRs) and on the fatigue crack growth mechanisms in a cast duplex stainless steel is studied. FCGRs measured at room temperature increase slightly after ageing at 400 °C, due to ferrite cleavage and to the resulting irregular shape of the crack front. The crack propagates without any preferential path by successive ruptures of ferrite and austenite phases. The macroscopic crack propagation plane depends on the crystallographic orientation of the ferrite grain. Secondary cracks can appear due to the complex solidification structure. This in turn influences the FCGR. The fatigue crack closure level decreases with increasing ageing. This can be explained by a decrease in the kinematic cyclic hardening of these materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Fatigue & Fracture of Engineering Materials & Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.