Abstract
The effects of stress ratio on the fatigue crack initiation and growth were investigated by a newly developed unified model, which is based on the cyclic plasticity property of material and a multiaxial fatigue damage criterion in incremental form. The cyclic elastic–plastic stress–strain field was analyzed using the general-purpose finite element software (ABAQUS) with the implementation of a robust cyclic plasticity theory. The fatigue damage was determined by applying the calculated stress–strain responses to the incremental fatigue criterion. The fatigue crack growth rates were then obtained by the unified model. Six compact specimens with a thickness less than 3.8 mm were used for the fatigue crack initiation and growth testing under various stress ratios (−1.0, 0.05, 0.1, 0.2, 0.3 and 0.5). Finite element results indicated that crack closure occurred for the specimen whose stress ratio was less than 0.3. The combined effects of accumulated fatigue damage induced by cyclic plastic deformation and possible contact of cracked surfaces were responsible for the fatigue crack initiation and growth. The predicted results agreed with the benchmark mode I fatigue crack growth experiments very well.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.