Abstract
AbstractPlain bend bars made from FV566 martensitic stainless steel were extracted from the root of ex‐service power plant turbine blades and several industry‐relevant notch geometries were introduced. Some of the samples were shot peened. The notched bend bars were loaded plastically in the low‐cycle fatigue regime and finite element (FE) modeling carried out to investigate the effects of changing notch geometry, combined with shot peening, on fatigue behaviors such as crack initiation, short crack growth, and coalescence. Shot peening damaged the notch surface, accelerating initiation behaviors, but had a lifetime‐extending effect by retarding short crack growth in all tested notch geometries. At a total strain range higher than 1.2%, the lifetime extension benefit from shot peening was diminished due to compressive residual stress relaxation in the notch stress field. Notch geometry (and the associated varying constraint levels and stress/strain gradients) was found to have no notable difference on fatigue life when tested at identical notch‐root strain ranges.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Fatigue & Fracture of Engineering Materials & Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
