Abstract
Most of in-service welded built-up structures, which contain many welded joints as fatigue crack initiation sites, are subjected to many types of loading and these loadings have different axial components with different phases. However, the structural integrities are evaluated according to design codes based on theoretical and experimental investigations under a uniaxial loading condition. Most of these codes are based on the S-N curves approach. On the other hand, authors proposed the numerical simulation method of fatigue crack propagation histories of a cracked plate subjected biaxial loadings with phase difference of each loading component. Fracture mechanics approach is applied to establish our method. In this study, fatigue crack growth behaviour of an out-of-plane gusset welded joint under biaxial loading with two different phase conditions were investigated. The phase difference effect for fatigue crack shape evolution under biaxial loading was confirmed by measured ones. Besides, comparisons of measured crack evolution with the numerical simulation results were performed to validate of our fatigue crack growth simulation for welded joints.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.