Abstract

Due to the superior properties such as low density, improved strength and wear resistance, the in-situ TiB2/7050Al MMCs have become a series of promising aeronautical materials. However, researches of manufacturing performance and fatigue behavior on machined in-situ TiB2/7050 Al MMCs have not been widely carried out. In this study, the fatigue behavior of machined in-situ TiB2/7050Al MMCs specimens such as fatigue mechanism, stress concentration, fatigue life and life modeling were deeply investigated. It was found that the fatigue life ranges from 1.0 × 105 to 4.0 × 106, which turned to be obvious high-cycle fatigue life. With surface roughness increased, the fatigue life decreased sharply. It would be highly significant to reduce the machined surface roughness below 1.0 μm for higher fatigue life. The fracture mechanisms of cutting in-situ TiB2/7050Al MMCs was found to be brittle fracture due to the existence of fine particles. Besides, a stress concentration model and fatigue life prediction model were established. With validation, the relative errors between prediction model and experiment were smaller than 18% indicating that the proposed fatigue life prediction model of machined in-situ TiB2/7050Al MMCs was of good reliability and accuracy.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call