Fatigue behavior of E-glass fiber reinforced phenolic composites: effect of temperature, mean stress and fiber surface treatment

Abstract

Phenolic matrix is reinforced by unidirectional E-glass fibers with volume fractions of 0.30 and 0.45. Three different surface treatments are applied to the E-glass fibers. The composite specimens are tested at ambient condition and temperatures of 100°C 150° and 200°C with stress levels of R(σ min /σ max ) equal to 0 and 0.4 for load frequencies of 1.5, 10 and 25 Hz. Data are presented in terms of S/N curves and assessed by degradation of modulus based on compliance. For a particular fiber glass surface treatment and volume fraction, the composite specimen is notched and tested at room temperature and 200°C. A fatigue strength reduction factor K f is defined and obtained such that the results could be compared with those of the unnotched specimens. Notch effect is small if the hole diameter is equal to the specimen thickness; it would be important for larger hole sizes. Fractured surfaces are examined by the scanning electron microscope.