Abstract

In numerous engineering projects, such as tunnel construction, underground gas storage in caverns, and the impact of earthquakes, rock materials experience cyclic loading. However, the response of rock materials to cyclic loading, which may vary in terms of waveform, frequency, and amplitude, is not uniform. Consequently, comprehending the mechanical attributes and fatigue behavior of rocks holds significant importance in engineering designs. This study focuses on subjecting a collection of cylindrical concrete specimens, categorized into three groups with distinct mechanical properties, to both monotonic and cyclic loading within a laboratory environment. Three groups of cylindrical concrete samples with different mixing designs are prepared to evaluate the effect of the mechanical strength of the samples on the fatigue response of the rock. In such a way that: The first group (G1) with Uniaxial Compressive Strength (UCS): 19 MPa, the second group (G2) with (UCS): 49 MPa, and the third group (G3) with (UCS): 71 MPa. In addition, the discrete element method is utilized to simulate uniaxial cyclic compression tests under various loading conditions, such as monotonic and cyclic loading. The resulting fracture propagation patterns and geometries are then analyzed. Numerical and experimental results show that the cyclic uniaxial compressive strength, due to the presence of damage and fatigue phenomena, has decreased relative to the monotonic tests. Also the cyclic elastic modulus values (Ec) have decreased by 53 %, 25 %, and 11 % relative to the monotonic elastic modulus (Em) for the three groups of G1, G2, and G3, respectively. The Stress-life (S-N) model is used to express the fatigue behavior of rock, and the final equation for the S-N model is expressed.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call