Fatigue assessment of welded joints in API 579-1/ASME FFS-1 2016 - existing methods and new developments

Abstract

The 3rd Edition of API 579-1/ASME FFS-1 2016 Fitness-For-Service includes a new Part 14 dedicated to fatigue assessment. An important section in this part covers the fatigue assessment of welded joints. In this paper, an overview of the fatigue methods for welded joints is provided and extensions are recommended. First, an overview is given of the classical fatigue method used in the ASME B&PV Code based on smooth bar fatigue curves in conjunction with a fatigue strength reduction factor. In addition, the mesh insensitive structural stress method is outlined using an equivalent stress parameter based on fracture mechanics considerations in conjunction with a master S-N curve based on the analysis of over 2000 high and low cycle S-N test data. The resulting master S-N curve approach is applicable to high cycle fatigue and low cycle fatigue if a Neuber correction is introduced. In this paper, a new structural strain method is presented to extend the early structural stress based master S-N curve method to the low cycle fatigue regime in which plastic deformations can be significant while an elastic core is present. With this new method, some of the inconsistencies of the pseudo-elastic structural stress procedure can be eliminated, such as its use of Neuber’s rule in approximating structural strain beyond yield. The earlier mesh-insensitive structural stress based master S-N curve method can now be viewed as an application of the structural strain method in the high cycle regime, in which structural strains are linearly related to traction-based structural stresses according to Hooke’s law. Thus, both low cycle and high cycle fatigue behavior can now be treated in a unified manner. In the low-cycle regime, the structural strain method characterizes fatigue damage directly in terms of structural strains that satisfy a linear through-thickness deformation gradient assumption, material nonlinear behavior, and equilibrium conditions. A PVRC Joint Industry Project is currently sponsoring work on the structural strain method that will lead to its incorporation in the next edition of API 579-1/ASME FFS-1.