Abstract
The fate of perfluorooctanoic acid (PFOA) has been investigated for an emerging sludge treatment technique using microwave heating-assisted persulfate (PS) oxidation. The effect of heating temperature (20, 50, and 70°C) and PS dose (PS1: 0.01; PS2: 0.1; PS3: 0.2g/g wet sludge) was studied in sludge spiked with PFOA at an environmentally relevant concentration (200ng/g wet weight). Control degradation experiments using spiked sludge without PS addition and background sludge (no PFOA spike) with PS addition were also conducted at each temperature. Sludge samples were analyzed for eight perfluorocarboxylic acids (PFCAs) (C4 - C11) using LC-MS/MS. At 20°C (PS2 dose), minimal (~ 5%) removal of the spiked PFOA was observed after 72h, suggesting the need for elevated treatment temperature. For the same PS dose (0.1g /g sludge), treatment at 50 and 70°C showed a decrease in PFOA concentration with increasing temperature, with ~ 28 and ~ 42% removal following 4h of treatment. No significant increase in degradation was observed for the highest dose (PS3) after 2h, possibly indicating self-scavenging of PS at high dosage. Due to the low initial spiking concentration of PFOA and low extraction recovery, all shorter-chain PFCAs (< C8), the degradation products of PFOA, were below quantification limits in all sludge samples.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
