Abstract
The application of membrane bioreactors (MBRs) to brine denitrification for ion exchange regeneration has been studied. The developed culture was capable of complete brine denitrification at 50 gNaCl.l−1. Denitrification reduced to c.60% and c.70% when salinity was respectively increased to 75 and 100g.l−1, presumed to be due to reduced growth rate and the low imposed solids retention time (10 days). Polysaccharide secretion was not induced by stressed cells following salt shocking, implying that cell lysis did not occur. Fouling propensity, monitored by critical flux, was steady at 12–15l.m−2.h−1 during salinity shocking and after brine recirculation, indicating that the system was stable following perturbation. Low molecular weight polysaccharide physically adsorbed onto the nitrate selective anion exchange resin during regeneration reducing exchange capacity by c.6.5% when operating up to complete exhaustion. However, based on a breakthrough threshold of 10 mgNO3−-N.l−1 the exchange capacity was comparative to that determined when using freshly produced brine for regeneration. It was concluded that a denitrification MBR was an appropriate technology for IEX spent brine recovery and reuse.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.