Fast Reciprocating Probe Assembly for the KSTAR

Abstract

AbstractA fast reciprocating probe assembly (FRPA) that can scan a distance of up to 32.5 cm with a maximum speed of 1.7 m/s was fabricated to obtain the spatial profile of basic plasma parameters in the edge region of the KSTAR plasma during a plasma discharge of 20 s. The probe driving mechanism consists of two parts; first a slow movement driven by a servo motor system and then a fast reciprocating movement actuated by a pneumatic system. A performance test of the drive system, which is remotely controlled by a PC, was carried out. The prototype of the probe head for the KSTAR FRPA was fabricated as a modular type for easy replacement. It was installed in the fast injection probe assembly (FIPA) in the Hanbit magnetic mirror device, and a radial plasma parameter profile measurement was carried out. The performance test results of the drive system and the profile measurements using the probe head are presented. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)