Abstract
The re-oxidation kinetics of BaTiO3 ceramics sintered by Spark Plasma Sintering (SPS) was investigated using in-situ impedance spectroscopy. Thanks to the flexibility of the SPS process, the grain size of the dense ceramics was tuned from 0.5μm to 10μm. The re-oxidation kinetics are found to be very fast regardless of the grain size and a full re-oxidation of the ceramics are achieved after 20h of exposure to an ambient environment at only 600°C. The residual density of charge carriers is reduced when using finer starting powders. SPS ceramics made with micrometer size grains demonstrate a residual charge-carrier density that is one tenth that of ceramics made from 10μm particles. Grain-boundary conduction is dominant through fine-grain SPS ceramics. This latter feature is similar to BaTiO3 sintered using the conventional route with 10μm size grain. Finally, the critical grain size for optimal dielectric permittivity is found to shift from 0.7μm in standard ceramics to 1.5μm in SPS ceramics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
