Fast pyrolysis of lignocellulosics in a twin screw mixer reactor

Abstract

A process development unit (PDU) with 10kg/h biomass capacity was designed, built and operated for fast pyrolysis of biomass. A twin-screw type reactor, in earlier applications used for treatment of coal, oil shale, oil sand and oil refinery residues, was used. Test campaigns with a variety of biomass types were performed. The results with hard-wood, softwood, wheat straw and wheat bran are reported and discussed in this paper, verifying the suitability of the twin screw reactor along with a new product recovery procedure. Liquid pyrolysis condensate, termed bio-oil, is the main product of FP and the yields are about 65±10wt.% for wood but only about 50±10wt.% for cereal straw, which is a typical result for all fast growing types of biomass with higher ash content. These product yields and properties are similar to those found for other FP reactor types and recovery procedures.