Abstract
Calorimetric experiments at cooling rates comparable to those during injection molding, as an example, are needed to study phase transitions under conditions relevant for processing. Ultra fast scanning calorimetry is a technique which provides a means to analyze the materials of interest under rapid cooling conditions and it is a promising technique by which the crystallization behavior of composite systems based on fast crystallizing polymers like isotactic polypropylene (iPP) can be studied. By combining conventional DSC and ultra fast chip calorimetry isothermal crystallization experiments were performed in the whole temperature range between glass transition and melting temperature of iPP. Because of the very small time constant of the calorimeter, isothermal crystallization processes with peak times down to 100ms were investigated after cooling the sample from the melt at 2000K/s. iPP grafted with maleic anhydride (PPgMA) – montmorillonite clay nanocomposites were studied. The influence of various clay loadings on the crystallization behavior of PPgMA at different temperatures was followed by ultra fast isothermal calorimetry. PPgMA clay nanocomposites showed a variation in crystallization peak times with different clay loadings at crystallization temperatures between 70°C and 100°C. No influence of clay loading was observed at lower crystallization temperatures. At these temperatures, where the mesophase is formed and homogeneous nucleation is expected, the contribution of the clay as a nucleating agent is negligible. For crystallization at about 80°C, where the α-phase is formed, the nucleating effect of the clay is observed yielding complex crystallization kinetics. In the temperature range 75–85°C in some nanocomposites a double peak during isothermal crystallization was observed corresponding to a fast and a slow crystallization processes occurring simultaneously. At higher temperatures, above 120°C, the clay slightly retards the crystallization process.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
