Abstract
The present work discusses the technique and methodology of analysing the potential of fast data acquisition of aerial images using unmanned aerial vehicle system. This study utilizes UAV system for large scale mapping by using digital camera attached to the UAV. UAV is developed from the low-altitude photogrammetric mapping to perform the accuracy of the aerial photography and the resolution of the image. The Ground Control Points (GCPs) and Check Points (CPs) are established using Rapid Static techniques through GPS observation for registration purpose in photogrammetric process. The GCPs is used in the photogrammetric processes to produce photogrammetric output while the CP is employed for accuracy assessment. A Pentax Optio W90 consumer digital camera is also used in image acquisition of the aerial photograph. Besides, this study also involves image processing and map production using Erdas Imagine 8.6 software. The accuracy of the orthophoto is determined using the equation of Root Mean Square Error (RMSE). The final result from orthophoto is compared to the ground survey using total station to show the different accuracy of DEM and planimetric survey. It is discovered that root mean square errors obtained from UAV system are ± 0.510, ± 0.564 and ± 0.622 for coordinate x, y and z respectively. Hence, it can be concluded that the accuracy obtained from UAV system is achieved in sub meter. In a nutshell, UAV system has potential use for large scale mapping in field of surveying and other diversified environmental applications especially for small area which has limited time and less man power.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have