Fast and accurate modelling of twin-screw compressors: A generalised low-order approach

Abstract

Twin-screw compressors (TSC) are commonly used in heat pump processes due to their robustness and flexibility. They exhibit two core properties, i.e. the swept volume and the built-in volume ratio (BVR), which heavily influence their capacity limits and off-design efficiency. This work presents a new low-order model (i.e. a polynomial model), which can accurately predict a TSC’s behaviour. The model uses the external pressure ratio and volumetric compressor inlet flow rate to calculate isentropic efficiency and compressor speed. The input parameters are normalised with a reference flow rate (calculated from the swept volume) and the BVR, respectively. This results in a generalised model of low numerical cost, which can be used for explorative studies independent of the specific machine size and BVR. A gain in computational speed by a factor of 375 is achieved compared to a semi-empiric reference model. The model displays very good predictive accuracy when used to predict the performance of machines with similar BVRs, but different sizes. A mean deviation from the manufacturer data of 4.29%, 0.88°C and 1.38% for the shaft power, the outlet temperature and the compressor speed can be observed, respectively. When there is a difference in size and BVR, the prediction accuracy is still reasonable but significantly declines for small and very large pressure ratios. Nevertheless, the proposed new approach extends the state-of-the-art by introducing a low-order model, which combines the advantages of low computational cost, high accuracy, physically correct predictions over a wide operational range and scalability to different machine capacities and BVRs. The validation for different fluids indicates a good general prediction accuracy relatively independent of the used fluid.