Abstract
Guanidine carbonate is shown to be an accelerator of phenol-formaldehyde (PF) resins that while yielding slightly slower gel times than triacetin when added to a PF resin glue mix, is also capable of giving glue-mix pot lives on the order of several days. Hence, this is long enough to be premixed with the resin long before use. Both triacetin and guanidine carbonate used as simple glue-mix additives are shown to increase the ultimate strength of the resin bond, whatever the length of the curing time used for the purpose. This is shown by thermomechanical analysis and the application to wood particleboard. Triacetin is shown to be usable during PF resin preparation rather than just being added to the glue mix, yielding better resins capable of giving higher bond values without a great acceleration of the geling of the resin itself. The mechanisms involved in the acceleration of PF resins introduced by both compounds appears to be based on facilitating reactions of crosslinking involving carbonic acid ions present in the resin solution. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 249–259, 2000
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
