Failure prediction for multi-material creep test specimens using a steady-state creep rupture stress

Abstract

The steady-state stress distributions in single- and multi-material notched and waisted specimens were investigated for practical creep test specimens using material properties obtained for materials from a service-aged CrMoV pipe weldment. The tri-axial stress conditions existing in notched and waisted specimens machined from welded pipes were identified. By using a steady-state effective failure stress, it has been shown that an approximate method, based on steady-state stress, for the prediction of rupture life and failure position can produce reasonably accurate results. The applicability of the approximate method was confirmed by comparing the results obtained using it with those obtained from corresponding creep continuum damage modelling. These results indicate that use of steady-state stress analysis, as an approximate technique, may be useful for assessing creep failure behaviour, for determining the effect of specimen size and for generating material properties for welded components.