Failure mechanism and kinematics of the deadly June 24th 2017 Xinmo landslide, Maoxian, Sichuan, China

Abstract

At 5:38 am on the 24th June, 2017, a catastrophic rock avalanche destroyed the whole village of Xinmo, in Maoxian County, Sichuan Province, China. About 4.3 million m3 of rock detached from the crest of the mountain, gained momentum along a steep hillslope, entrained a large amount of pre-existing deposits, and hit the village at a velocity of 250 km/h. The impact produced a seismic shaking of ML = 2.3 magnitude. The sliding mass dammed the Songping gully with an accumulation body of 13 million m3. The avalanche buried 64 houses; 10 people were killed and 73 were reported missing. The event raised great concerns both in China and worldwide. Extensive field investigation, satellite remote sensing, UAV aerial photography, and seismic analysis allowed to identify the main kinematic features, the dynamic process, and the triggering mechanism of the event. With the aid of ground-based synthetic aperture radar monitoring, the hazard deriving from potential further instabilities in the source area has been assessed. The preliminary results suggest that the landslide was triggered by the failure of a rock mass, which had been already weakened by the Ms 7.5 Diexi earthquake in 1933. Several major earthquakes since then, and the long-term effect of gravity and rainfall, contributed to the mass failure. The high elevation, slope angle, and vegetation cover in the source area hinder geological field investigation and make hazard assessment difficult. Nonetheless, monitoring and prevention of similar collapses in mountainous areas must be carried out to protect human lives and infrastructures. To this aim, the integrated use of modern high-precision observation technologies is strongly encouraged.