Failure loads of spot weld specimens under impact opening and shear loading conditions

Abstract

Failure loads of spot weld specimens are investigated under impact combined loading conditions. A set of test fixtures was designed and used to obtain failure loads of mild steel spot weld specimens under combined opening and shear loading conditions. Three different impact speeds were applied to examine the effects of separation speed on failure loads. Micrographs of the cross-sections of failed spot welds were obtained to understand the failure processes in mild steel specimens under different impact combined loads. The experimental results indicate that the failure mechanisms of spot welds are very similar for mild steel specimens at various impact speeds. These micrographs show that the sheet thickness can affect the failure mechanisms. For 1.0 mm specimens, the failure occurs near the base metal in a necking/shear failure mode. For 1.5 mm specimens, the failure occurs near the heat-affected zone in a shear failure mode. Based on the experimental results, the effects of the inertia force, the separation speed, and the loading angle on the failure loads of spot welds are investigated. Failure criteria are proposed to characterize the failure loads of spot welds under impact combined opening and shear loads for engineering applications. The failure load can be expressed as a function of the tensile strength of the base metal, the nugget size, the sheet thickness, the maximum separation speed, the loading angle, and empirical coefficients for a given welding schedule.