Abstract
A uniaxial compression test was conducted with a servo loading apparatus to study the failure of a rock-like specimen with a pre-existing single flaw. The evolution of cracks was monitored with digital image correlation technology and simulated with the expanded distinct element method based on the strain strength criterion. The concentration and evolution of the principal strain field were found to be consistent with the initiation, propagation, and coalescence of cracks. As the inclination angle increased, the position of the maximum principal strain concentration changed from within the flaw to the flaw tips, and the distribution of the horizontal displacement field changed from symmetric to antisymmetric. The initiation stress and peak strength were affected by the inclination angle; they were minimum when the inclination angle was 60°. As the inclination angle increased, the failure mode of the specimens transformed from mostly tensile failure to mostly shear failure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Bulletin of Engineering Geology and the Environment
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
