Abstract
In mineral processing industries vibrating screens operate under high structural loading and continuous vibrations. In this regard, this may result in high strain rates, which may often lead to structural failure or damage to the screen. In order to lessen the possibility of failure occurring, theories and techniques for analyzing machine structures are investigated and applied to perform a sensitivity study of a newly developed vibrating screen. Structural strength and stability of a vibrating screen is essential to insure that failure doesn’t occur during production. In this paper a finite element analysis (FEA) on a reconfigurable vibrating screen (RVS) is carried out to determine whether the structure will perform as desired under extreme working conditions at the different configurations of 305mm×610mm, 305mm×1220mm and 610mm×1220mm. This process is aimed at eliminating unplanned shutdowns and minimizes maintenance cost of the equipment. Each component of a screen structure is analyzed separately, stress and displacement parameters are determined based on dynamic analysis. In addition, a modal analysis was carried out for the first three (3) modes at frequency f of 18.756Hz, 32.676Hz and 39.619Hz respectively. The results from the analysis showed weak points on the side plates of screen structure. Further improvements were incorporated to effectively optimize the RVS structure after undergoing an industrial investigation of similar machines.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
