Abstract
Based on the Gurson-Tvergaard-Needleman (GTN) model and Hill’s quadratic anisotropic yield criterion, a combined experimental-numerical study on fracture initiation in the process of thermal stamping of Mg alloy AZ31 sheets was carried out. The aim is to predict the formability of thermal stamping of the Mg alloy sheets at different temperatures. The presented theoretical framework was implemented into a VUMAT subroutine for ABAQUS/EXPLICIT. Internal damage evolution due to void growth and coalescence developed at different temperatures in the Mg alloy sheets was observed by scanning electron microscopy (SEM). Moreover, the thermal effects on the void growth, coalescence, and fracture behavior of the Mg alloy sheets were analyzed by the extended GTN model and forming limit diagrams (FLD). Parameters employed in the GTN model were determined from tensile tests and numerical iterative computation. The distribution of major and minor principal strains in the specimens was determined from the numerical results. Therefore, the corresponding forming limit diagrams at different stress levels and temperatures were drawn. The comparison between the predicted forming limits and the experimental data shows a good agreement.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Minerals, Metallurgy, and Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.