Abstract
This work investigated the premature failure of a beam reinforcement made of austenitic stainless steel AISI 310 used in the entrance of a rolling beam furnace working continuously at cycles from 650 to 850 °C. Fracture surface and microstructural investigations allowed to identify the fracture mechanism as fatigue failure. The fracture was probably initiated at the oxidized grain boundaries at an early stage of service life, when no microstructure degradation was present, while most of the fatigue crack propagation occurred after the precipitation of secondary phases. The microstructure investigation revealed severe microstructure degradation with the presence of intermetallic sigma (σ) phase (area fraction = 19 %) and M23C6 carbides (area fraction = 1 %), which were formed during the high-temperature exposure. Cracking of σ phases and decohesion at σ /austenite matrix interfaces were observed near the fracture and in the small punch test samples. Such discontinuities provide an easy path for crack propagation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
