Abstract
A case study of a catastrophic failure of a diesel motor crankshaft is presented. The aim of this failure analysis is to investigate the root cause of this important mechanical component. This crankshaft belonged to a particular vehicle (140 cv, at 4000 rpm, 1968 cm3 displacement) that fractured after 180,000 km and 8 years in service. The motor was disassembled, and the crankpin No. 3 and the main bearing cap No. 4 were broken. Defects of material and machining defects were not found at the crack initiation sites by optical and SEM microscope. Results shown that the crankpin and the main bearing cap clearly failed by fatigue, and the root cause seems to be related with deficient tightening of the main bearing cap No. 4, which fractured due to a crack developed on the its outer side. The main journal No. 4 did run out of support, and the crankthrow No. 3 increased the alternating stress amplitude, whereby an inevitable catastrophic crankshaft failure happened.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
