Factors influencing MnO 2/multi-walled carbon nanotubes composite's electrochemical performance as supercapacitor electrode

Abstract

Poor crystallined α-MnO 2 grown on multi-walled carbon nanotubes (MWCNTs) by reducing KMnO 4 in ethanol are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and Brunauer–Emmett–Telle (BET) surface area measurement, which indicate that MWCNTs are wrapped up by poor crystalline MnO 2 and BET areas of the composites maintain the same level of 200 m 2 g −1 as the content of MWCNTs in the range of 0–30%. The electrochemical performances of the MnO 2/MWCNTs composites as electrode materials for supercapacitor are evaluated by cyclic voltammetry (CV) and galvanostatic charge–discharge measurement in 1 M Na 2SO 4 solution. At a scan rate of 5 mV s −1, rectangular shapes could only be observed for the composites with higher MWCNTs contents. The effect of additional conductive agent KS6 on the electrochemical behavior of the composites is also studied. With a fixed carbon content of 25% (MWCNTs included), MnO 2 with 20% MWCNTs and 5% KS6 has the highest specific capacitance, excellent cyclability and best rate capability, which gives the specific capacitance of 179 F g −1 at a scan rate of 5 mV s −1, and remains 114.6 F g −1 at 100 mV s −1.