Factors influencing fractures networks within Permian shale intervals in the Cooper Basin, South Australia

Abstract

The future success of both enhanced (engineered) geothermal systems and shale gas production is reliant on the development of reservoir stimulation strategies that suit the local geo-mechanical conditions of the prospects. The orientation and nature of the in-situ stress field and pre-existing natural fracture networks in the reservoir are among the critical parameters that will control the quality of the stimulation program. This study provides a detailed investigation into the nature and origin of natural fractures in the area covered by the Moomba–Big Lake 3D seismic survey, in the southwest termination of the Nappamerri Trough of the Cooper Basin. These fractures are imaged by both borehole image logs and complex multi-traces seismic attributes (e.g. dip-steered most positive curvature and dip-steered similarity), are pervasive throughout the cube, and exhibit a relatively consistent northwest–southeast orientation. Horizon extraction of the seismic attributes reveal a strong variation in the spatial distribution of the fractures. In the acreage of interest, fracture density is at its highest in the vicinity of faults and on top of tight antiforms. This study also suggests a good correlation between high fracture density and high gamma ray values. The correlation between high fracture density and shale content is somewhat counterintuitive, as shale is expected to have a higher tensile and compressive strengths at shallow depths and typically contain fewer fractures (Lin, 1983). At large depths, however—and due to sandstone diagenesis and cementation—shale has lower tensile and compressive strength than sandstone and is expected to be more fractured (Lin, 1983). A similar correlation has been noted in other Australian Basins (e.g. Northern Perth Basin). Diagenetic effects, pore pressure, stiffness, variations in tensile versus compressive strength of the shale and the sandstone may explain this disparity.