Abstract
The tensile shear strength, break location, and constant tensile load failure times are examined for seams made from one 4 mm-thick bituminous geomembrane (BGM) product, with corresponding observations specific to that material. In short-term tests, failure is observed within the sheet material once the seam strength exceeded 0.8 times that of the sheet material. The effects of seam thickness reduction and overlap width on seam strength are examined for two methods of seaming. Seams with a short-term strength meeting or exceeding 80% of the sheet strength are subjected to constant tensile loads between 18 and 55% of sheet ultimate strength and the time to failure is reported. The relationship between short-term seam strength and time to failure under sustained load and thickness reduction and squeeze-out is investigated. Constant tensile load testing is proposed as a construction quality assurance procedure to assess the degree of geotextile engagement of field seams.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
