Factors Affecting the Settlement Estimation of Stone Column Reinforced Soils

Abstract

The ground improvement technique of stone columns has been effectively used over the last decades in order to accelerate the consolidation rate of soft soils by providing a drainage path, reduce foundation settlements, improve the bearing capacity of the soil, and limit the risk of liquefaction due to seismic activity. Because of the time consumption of a three dimensional (3D) calculation, most stone column projects are presently studied by axisymmetric finite element computations. Otherwise, it is the analytical method of Priebe that is commonly used to predict the final settlements of a single stone column and the corresponding settlement reduction factor. Both methods, axisymmetric finite element analysis and Priebe’s analytical method make use of the axisymmetric theory of unit cell. The main objective of this study is to examine and compare the three dimensional response of stone column reinforced soils with the axisymmetric analysis results. A proposed analytical method, governed by the failure mechanism of a cylindrical cone is also presented. The comparison between these different approaches is studied and evaluated in conjunction with in situ measurements. It is proved that the beneficial effect of this ground improvement technique, especially on the foundation soil with the lower strength characteristics, is more pronounced. Also, it is concluded that due to unit cell theory, the settlement reduction factor is usually under predicted and the failure of the composite system is impossible, even under high applied pressures. The proposed analytical method of the cylindrical cone failure mechanism is proved to be in good agreement with the 3D results.