Abstract
The production of wood pellets has more than doubled between 2010 and 2015 to over 30 million metric tons. It is expected to grow to even more than 50 million metric tons by 2025. Thus, increasing demand for wood pellets for its energy utilization has prompted researchers to search for non-woody feedstocks. In this context, a potentially huge underutilized biomass such as garden waste can be explored as an alternative feedstock. The key factors affecting the quality of fuel pellets were evaluated during the garden waste pelletization process. Experiments were performed using a flat die pellet mill to investigate the effect of feedstock moisture content, die size, and milling size on pellet quality. Quality parameters such as pellet moisture, pellet length, bulk density, and durability were measured as per ASABE standards. Feed moisture content had a significant effect on durability and bulk density, with high quality pellets produced at the low feed moisture content (< 20%). The quality parameters of produced pellets were evaluated as per standards. It is concluded from the investigation that pellets produced at 5-10% feed moisture content using 15 mm die and fine shredded biomass satisfies the ISO standard and other norms.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.