Abstract
3D printing is the process where layers of materials are deposited to make structures of complex geometries. 4D printing is a process that combines 3D printing with the application of some activating agent in order to change the shape of the manufactured part after the process, e.g. the flat structure will change its shape to take up the desired complicated shape such as “curved” or “S” shaped. As such the 3D printing process does not have to spend time to print the intricate parts, and the process can be faster. The requirement for 4D printing is that materials with special characteristics that are responsive to an activating agent need to be used. 4D printing of composites utilizes the same concept of 4D printing, except that the materials used are long fiber composite materials. 4D printing of composites utilizes the shrinkage of the matrix resin, and the difference in coefficients of thermal contraction of layers with different fiber orientations to activate the change in shape upon curing and cooling. This behavior can be used to make parts with curved geometries without the need for a complex mold. As such manufacturing of pieces of curved shapes can be fast and economical. However, the degree of shape changing depends on the material properties, the fiber orientation, the lay up sequence and the manufacturing process. This paper presents the results obtained from a study on the effects of these aspects on the shape of the curved parts.
Highlights
3D printing is the process where layers of materials are deposited to make structures of complex geometries. 4D printing is a process that combines 3D printing with the application of some activating agent in order to change the shape of the manufactured part after the process, e.g. the flat structure will change its shape to take up the desired complicated shape such as “curved” or “S” shaped
The requirement for 4D printing is that materials with special characteristics that are responsive to an activating agent need to be used. 4D printing of composites utilizes the same concept of 4D printing, except that the materials used are long fiber composite materials. 4D printing of composites utilizes the shrinkage of the matrix resin, and the difference in coefficients of thermal contraction of layers with different fiber orientations to activate the change in shape upon curing and cooling
The concept of 4D printing using these types of mechanism is extended to the concept of 4D printing of composites in this paper
Summary
The concept of 4D printing using these types of mechanism is extended to the concept of 4D printing of composites (or moldless composite manufacturing) in this paper. The reconfiguration of the laminate upon curing and cooling can be thought to be due to two mechanisms (with the assumption that the stiffness of the material is sufficiently high): One is the resin shrinkage due to chemical reactions between the molecules in the resin, and the other is due to mismatch in coefficients of thermal contraction along different directions in different layers in the laminate upon cooling from the cure temperature down to room temperature. For laminates made of thermoset matrix composites, the shrinkage effect takes place during the curing of the resin which occurs at relatively high temperature.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Advanced Manufacturing: Polymer & Composites Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
