Abstract
ABSTRACTTwo corn meals, one with good and one with poor expansion properties, were used to study the critical factors responsible for poor expansion during corn curl extrusion. Screening tests revealed that the corn meal with poor expansion had a slightly larger particle size. This sample also had a larger proportion of opaque particles compared to the corn meal with good expansion. Extrusion of coarse corn grits showed that larger particle size alone could cause poor expansion. Water diffusion tests showed that the sample containing more opaque particles was more competitive for water. As a result, in corn that contained both opaque and vitreous particles less water was available to the vitreous particles. The underplastisized (dry) vitreous particles remained glassy (unmelted) during extrusion, resulting in reduced expansion of the extrudates. The results suggest that addition of water to the conditioning cylinder of the extruder would overcome poor expansion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.