Abstract
Tailored designs/fabrications of hierarchical porous advanced electrode materials are of great importance for developing high-performance electrochemical sensors. Herein, we demonstrate a simple and low-cost in situ chemical approach for the facile synthesis of MnO2-embedded hierarchical porous carbon microspheres (MnO2/CM). By the characterizations of scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray powder diffraction and energy dispersive spectroscopy, we evidenced that the synthesized product were flower-like carbon microspheres (CM) assembled by the bent flakes with thickness of about several nanometers and MnO2 nanorods were highly dispersed and successfully decorated on the CM layers, resulting in a rough surface and three-dimensional microstructure. The greatest benefit from the combined porous CM with MnO2 nanorods is that the MnO2/CM modified electrode has the synergetic catalysis effect on the electro-oxidation of caffeic acid, leading to the remarkable increase in the electron transfer rate and significant decrease in the over-potential for the caffeic acid oxidation in contrast to the bare electrode and CM modified electrode. This implies that the prepared MnO2/CM can be employed as an enhanced electrocatalyst for the sensitive detection of caffeic acid. Under the optimum conditions, the anodic peak current of caffeic acid is linear with its concentration in the range of 0.01–15.00 μmol L−1, and a detection limit of 2.7 nmol L−1 is achieved based on S/N = 3. The developed sensor shows good selectivity, sensitivity, reproducibility, and also excellent recovery in the detections of real samples, revealing the promising practicality of the sensor for the caffeic acid detection.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.