Abstract

The development of a heterogeneous catalyst for use in environmental remediation remains a challenging and attractive research endeavor. Specifically, for Fenton reactions, most research approaches have focused on the preparation of iron-containing heterostructures as photo-Fenton catalysts that utilize visible light for enhancing the degradation efficiency. Herein, the synthesis and novel application of C,N-doped iron borates are demonstrated as single-component heterogeneous photo-Fenton catalysts with high Fenton activity under visible light. Under the optimal conditions, 10 mg of the catalyst is shown to achieve effective degradation of 10 ppm methylene blue (MB) dye, Rhodamine B (RhB) dye, and tetracycline (TC) under simulated solar irradiation with a first-order rate constant of k = 0.218 min−1, 0.177 min−1, and 0.116 min−1, respectively. Using MB as a model system, the C,N-doped iron borate exhibits 10- and 26-fold increases in catalytic activity relative to that of the 50 nm hematite nanoparticles and that of the non-doped iron borate, respectively, in the presence of H2O2 under the simulated solar irradiation. Furthermore, the optimum reaction conditions used only 320 equivalents of H2O2 with respect to the concentration of dye, rather than the several thousand equivalents of H2O2 used in conventional heterogeneous Fenton catalysts. In addition, the as-prepared C,N-doped iron borate achieves 75% MB degradation after 20 min in the dark, thus enabling the continuous degradation of pollutants at night and in areas with poor light exposure. The stability and recyclability of C,N-doped iron borate for the oxidation of MB was demonstrated over three cycles with insignificant loss in photo-Fenton activity. The high Fenton activity of the C,N-doped iron borate is considered to be due to the synergistic action between the negatively-charged borate ligands and the metal center in promoting the Fenton reaction. Moreover, carbon and nitrogen doping are shown to be critical in modifying the electronic structure and increasing the conductivity of the catalyst. In view of its synthetic simplicity, high efficiency, low cost of reagents, and minimal cost of operation (driven by natural sunlight), the as-prepared heterogeneous single-component metal borate catalyst has potential application in the industrial treatment of wastewater.

Highlights

  • IntroductionThe development of a facile, effective, low-cost, stable, and non-toxic water treatment process is becoming a critical issue in the 21st century due to the drastic increases in population, urbanization, and industrialization

  • The X-ray diffraction (XRD) spectra contain no diffraction peaks corresponding to Fe3 O4 or boron carbon oxynitride (BCNO) [28,29], indicating that all the Fe and B species were converted into the C,N-doped FeBO3 nanocomposite

  • Since the XRD patterns of the C,N-doped FeBO3 do not contain any other impurity peaks and do not exhibit peak broadening or peak shifting, the results demonstrate that the carbon and nitrogen atoms were fully incorporated into the interstitial spacing of iron borate crystal structure

Read more

Summary

Introduction

The development of a facile, effective, low-cost, stable, and non-toxic water treatment process is becoming a critical issue in the 21st century due to the drastic increases in population, urbanization, and industrialization. Modern industrialization produces by-products and pollutants that have adverse effects upon human health, the environment, and aquatic life. Many innovative methodologies have been applied to the removal of contaminants from waste water, including coagulation, precipitation, electrolysis, sedimentation, ion exchange, and adsorption [1]. These physical separation methods fail to completely degrade the pollutants and, produce secondary waste products that are Nanomaterials 2021, 11, 2853.

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call