Abstract
In order to meet the increasing performance demands for resin matrix in aerospace industry and fulfill the sustainable development strategy, designment of bio-based epoxy resins with satisfactory comprehensive properties outperforming N,N,N′,N′-tetraglycidyl-4,4′-diaminodipehnylmethane (TGDDM) for high-end application is of paramount important but also a formidable challenge. Herein, a simple and high-efficient method was proposed to synthesize a bio-based tetra-functional epoxy resin (MTEP) from a sustainable biomass feedstock, magnolol. With 4,4′-diaminodiphenyl sulfone (DDS) as curing agent, the cured MTEP/DDS showed a record glass transition temperature of 326 °C and an ultrahigh char yield of 52.1%, which was 83 °C and 1.1 times higher than those of TGDDM/DDS, respectively. In addition, the cured MTEP/DDS also exhibited a high flexural modulus of 3991 MPa and storage modulus (at 25 °C) of 3705 MPa, which were all superior to those of TGDDM/DDS. More impressively, thanks to the unique structure of magnolol, the cured MTEP/DDS illustrated lower water absorption in comparison with TGDDM/DDS, and possessed outstanding intrinsic flame retardancy, attaining V-0 rating in UL-94 test. This work adds new members to the synthetic toolbox of high-performance bio-based polymers as composite resin matrix for potential aerospace applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
