Abstract
Stannic oxide nanoparticles and various compositions of SnO2@rGO (reduced graphene oxide) nanohybrids were synthesized by a facile hydrothermal method and utilized as chemiresistive methane gas sensors. To characterize the synthesized nanohybrids, BET (Brunauer-Emmett-Teller), XRD, FESEM, TEM, FTIR, and Raman techniques were used. Sensing elements were tested using a U-tube flow chamber with temperature control. To obtain the best sensor performance, i.e., the highest signal and the fastest response and recovery times, the sensing element composition, operating temperature, and gas flow rate were optimized. The highest response (change in resistance) of 47.6% for 1000 ± 5ppm methane was obtained with the SnO2@rGO1% nanohybrid at 150°C and a flow rate of 160sccm; the response and recovery times were 61s and 5min, respectively. A sensing mechanism was suggested, based on the experiments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.