Abstract
AbstractThis research helps with the creation, assessment, and characterization of a new hybrid protective coating for carbon steel alloy in acid conditions. The findings of this study will be useful for both chemical and petrochemical companies as well as scientists. This study aims to protect C-steel in acid pickling solution 1.0M HCl and formulate new hydrophobic protective hybrid organic–inorganic coatings from biopolymers chitosan and plant resin guar gum. Eight coating samples of chitosan in the absence and the presence of guar gum, silica and two heterocyclic compounds are prepared at feasible operational conditions using hot melt method. The aiding additives improved compatibility between coating constituents as confirmed by using different methods of analysis. This new processing approach has addressed the problems of using chitosan in corrosion control such as solubility in acid media and low mechanical strength. Coating samples of chitosan and its composites with the heterocyclic compounds (2-Hydrazinyl-6-methyl-4, 5-dihydro pyrimidine-4-on) or (2-Hydrazinyl-6-phenyl-4, 5-dihydro pyrimidine-4-on) are potent biocides. Coating shifts corrosion potential of carbon steel by 30 mV to more noble direction relative to the active potential 520 mV of bare carbon steel surface. Impedance and polarization measurements indicate that coating samples protect metal surface as mixed-type inhibitor by adsorption mechanism. There is a good agreement between percentages protection %P of coating calculated using the values of charge transfer resistance, Rct, and corrosion current density, icorr. All %P values are above 99% for all coating samples. Guar gum plant resin increases gloss of the coating film. Silica fills the pores in the polymeric film and increases the stuffiness of the polymeric coating film by modifying the particle size. All coated samples have high contact angle ranging from 150° to 165° indicating low wettability and high hydrophobicity of coating film on the metal surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.