Abstract
Microperforated membranes are essential components of various organ-on-a-chip (OOC) barrier models developed to study transport of molecular compounds and cells across cell layers in e.g. the intestine and blood-brain barrier. These OOC membranes have two functions: 1) to support growth of cells on one or both sides, and 2) to act as a filter-like barrier to separate adjacent compartments. Thin, microperforated poly(dimethylsiloxane) (PDMS) membranes can be fabricated by micromolding from silicon molds comprising arrays of micropillars for the formation of micropores. However, these molds are made by deep reactive ion etching (DRIE) and are expensive to fabricate. We describe the micromolding of thin PDMS membranes with easier-to-make, SU-8 epoxy photoresist molds. With a multilayer, SU-8, pillar microarray mold, massively parallel arrays of micropores can be formed in a thin layer of PDMS, resulting in a flexible barrier membrane that can be easily incorporated and sealed between other layers making up the OOC device. The membranes we describe here have a 30-μm thickness, with 12-μm-diameter circular pores arranged at a 100-μm pitch in a square array. We show application of these membranes in gut-on-a-chip devices, and expect that the reported fabrication strategy will also be suitable for other membrane dimensions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.