Facile extrusion 3D printing of gelatine methacrylate/Laponite nanocomposite hydrogel with high concentration nanoclay for bone tissue regeneration

Abstract

The extrusion 3D printing of hydrogels has evolved as a promising approach that can be applied for specific tissue repair. However, the printing process of hydrogel scaffolds with high shape fidelity is inseparable from the complex crosslinking strategy, which significantly increases the difficulty and complexity of printing. The aim of this study was to develop a printable hydrogel that can extrude at room temperature and print scaffolds with high shape fidelity without any auxiliary crosslinking during the printing process. To this end, a novel formulation consisting of a Laponite suspension with a high solid concentration and a gelatine methacrylate (GelMA) nanocomposite hydrogel was developed. A homogeneously dispersed high-concentration (up to 20% w/v) Laponite suspension was obtained by stirring at 0 °C. The addition of Laponite with high concentration improved the rheological properties, the degradation stability, and the mechanical strength of the hydrogel. The formulation of 15% (w/v) GelMA and 8% (w/v) Laponite nanocomposite hydrogel exhibited desirable printability and biocompatibility. The GelMA/Laponite hydrogels significantly promoted bone marrow mesenchymal stem cell (BMSC) proliferation and osteogenic differentiation. Both desirable printability under mild conditions and cyto-compatibility enable composite hydrogel a potential candidate as biomaterial inks to be applied for bone tissue regeneration.