Facile corrosion synthesis and sintering of disperse pure tetragonal zirconia nanoparticles

Abstract

Disperse pure tetragonal zirconia (t-ZrO2) nanoparticles smaller than 10nm are essential for preparation of structural and functional zirconia materials, but syntheses of t-ZrO2 nanoparticles using inorganic zirconium salts usually result in severe agglomeration. In this paper, we report a hydrothermal corrosion approach for improving the dispersity of t-ZrO2 nanoparticles synthesized by precipitation using zirconium oxychloride without any surfactants. Disperse pure t-ZrO2 nanoparticles with average sizes of 4.5 and 6nm and size distributions of 2–11 and 3–12nm were obtained by calcining precipitates at 400°C for 2h and 500°C for 0.5h followed by HCl corrosion at 120°C for 75h, respectively. Disperse t-ZrO2 nanoparticles with an average size of 6nm and a size distribution of 3–12nm were pressed into green compacts at 500MPa and sintered by two-step sintering (heating to 1150°C without hold and decreasing to 1000°C with a 10h hold). The sintered bodies are dense pure monoclinic ZrO2 nanocrystalline ceramic with a relative density of 99.9% and an average grain size of 110nm.