Abstract
Biomass-based aerogel materials have many advantages, such as low thermal conductivity and non-toxicity. These materials are environmentally friendly and have broad development potential in the fields of packaging, cushioning and green building insulation. However, defects, such as low mechanical strength and poor fire safety, greatly limit the application of these materials. In this work, the agar/polyvinyl alcohol composite aerogel modified by the magnesium hydroxide (MH)/sodium alginate (SA) composite flame retardant system was developed by using a freeze-dried technology and the strategy of in-situ generation of MH and crosslinking of SA. The results showed that the MH/SA dramatically enhanced the mechanical and thermal stability of the composites. The compression modulus of AP-M35S15 was 2.37 MPa, which was 152.13 % higher than that of AP-M50. The limiting oxygen index value of AP-M35S15 was 34.1 % and reached V-0 level in the vertical burning test, which was better than those of the samples with a single MH effect. The cone calorimetric test showed that the MH/SA composite flame retardant system performed better in extending the ignition time, slowing down the heat release rate and reducing the total heat release and had a more complete dense carbon structure after burning.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Biological Macromolecules
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
