Abstract
Fabrication of tall Cr nanostructures of different shapes by lithography and lift-off processes is demonstrated. By varying resist thickness, metal layer thickness, and diameter of holes in the resist mask, it is demonstrated that metal structures with shapes ranging from sharp-tipped conical over flat-top cones to nearly cylindrical can be fabricated. A comparison of resist layer dissolution in acetone, covered by Ag and Cr films, reveals that Cr films grow with an open structure of particles that allow rapid solvent diffusion through Cr layers that are several hundred nanometers thick. On the other hand, the 2D growth of Ag on the resist forms a barrier against acetone diffusion. The open structure of Cr enables the lift-off process to fabricate several-μm-high nanostructures using a single resist layer. As an example, high-aspect-ratio Si structures are demonstrated by reactive ion etching using thick Cr layers as a mask, fabricating nanopillars with 3 μm height at room temperature.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
