Abstract
Abstract In order to realize the mass production of the large-area flexible transparent film heater (FTFH) at low-cost, this paper presents a novel method which can achieve the direct fabrication of the large-area FTFH with Ag-grid by using an electric-field-driven jet deposition micro-scale 3D printing. The effects of the line width and the pitch of the printed Ag-grids on the optical transmittance and the sheet resistance are revealed. A typical FTFH with area of 80 mm × 60 mm, optical transmittance of 91.5% and sheet resistance of 4.7 Ω sq−1 is fabricated by the nano-silver paste with a high silver content (80 wt.%) and high viscosity (up to 20 000 mPa · s). Temperature-time response profiles and heating temperature distribution show that the heating performance of the FTFH has good thermal and mechanical properties. Furthermore, the adhesive force grade between the Ag-grid and the PET substrate measured to be 4B by 3M scotch tape. Therefore, the FTFH fabricated here is expected to be widely used in industry, such as window defroster of vehicles and display or touch screens owing to its striking characteristics of large area and low cost fabrication.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
