Fabrication of submicrometer-sized gold electrodes of controlled geometry for scanning electrochemical-atomic force microscopy.

Abstract

A method for fabricating submicrometer-sized gold electrodes of conical or spherical geometry is described. By generating an electric arc between an etched gold microwire and a tungsten counter electrode, the very end of the gold microwire can be melted and given an overall spherical or conical shape a few hundred nanometers in size. The whole wire is subsequently insulated via the cathodic deposition of electrophoretic paint. By applying a high-voltage pulse to the microwire, the film covering its very end can then be selectively removed, thus exposing a submicrometer-sized electrode surface of predefined geometry. The selective exposure of the preformed end of the microwire is demonstrated by cyclic voltammetry, scanning electron microscopy, and metal electrodeposition experiments. The electrophoretic paint coating provides a low-capacitance, robust insulating film allowing exploration of a very wide potential window in aqueous solution. The submicrometer-sized electrodes can easily be turned into probes suitable for combined scanning electrochemical-atomic force microscopy by bending and flattening the gold microwire so that the tip is borne by a flexible enough arm. The good agreement between theoretical and experimental scanning electrochemical microscopy approach curves thus obtained confirms that only the very end of the tip, of predefined geometry, is exposed to the solution.